Clean Lattice and Fencing

1. Rinse surrounding areas and vegetation with water.
2. Wet the section of the fence to be cleaned. (Do 1 section at a time.)
3. Put pressure wash siphon tube of the pressure washer directly into bottle of Krud Kutter Deck & Fence or pour product full strength into reservoir of the pressure washer.
4. Spray at a low pressure onto the wet surface.
5. Let sit for 3 – 5 minutes – DO not allow product to dry on surface. (Will work best if done out of direct sunlight.)
6. Heavily soiled or mildewed areas may need to be scrubbed.
7. A second application may be needed for heavily soiled areas
8. Rinse surrounding vegetation.
9. Repeat for all sections of lattice/fencing.
10. Rinse surrounding vegetation one more time.

 If you don’t have a pressure washer

1. Mix 12oz of product with 1 gallon of water in a bucket. (If heavily soiled it may be necessary to make the mixture slightly stronger with Krud Kutter Deck & Fence Pressure Washer Concentrate.)
2. Rinse surrounding areas and vegetation with water.
3. Wet the section of the fence to be cleaned. (Do 1 section at a time.)
4. Clean in sections with a soft bristle brush working from top down.
5. Let sit for 3 – 5 minutes – DO not allow product to dry on surface. (Will work best if done out of direct sunlight.)
6. Heavily soiled or mildewed areas may need to be scrubbed or a second application may be needed.
7. Rinse cleaner off the surface with a hose.
8. Repeat for all sections of lattice/fencing.
9. Rinse surrounding vegetation one more time.