Rust-Oleum Projects
Natural Wood Stain Wall Shelves
Browse Projects
-
Epoxy Resin Mosaic Serving Tray
-
Nautical Wooden Book Ends
-
Estimated Time
Approximately 24 hours
-
Challenge Level
Easy
-
Tools & Supplies:
-
Varathane Wood Stain in Natural
-
Varathane Ultimate Polyurethane - Water Based
-
2 - 16" Pieces of Unfinished Wood
-
2" Synthetic Paint Brush
-
Lint-Free Cloth
-
4 Wall Brackets
-
Sandpaper
-
Screwdriver
-
Screws
A natural wood stain is all it takes to refresh and update these unfinished wall shelves. Create a simple and natural look in any room when you complete a DIY project like this one from Karen Marie Co.
- Lightly sand the pieces of wood to create smooth surface.
- Lightly stir the can of Varathane Premium Fast Dry Wood Stain.
- With a brush or clean, lint-free rag, apply the wood stain to the bare wood, following the directions on the can. Allow stain to penetrate the wood for 2-3 minutes and then remove excess with a lint-free cloth, wiping in the direction of the grain.
- Let the wood stain dry for approximately 1 hour.
- Apply Varathane Ultimate Polyurethane with a foam brush, following the directions on the label.
- For the smoothest finish, lightly sand the polyurethane finish between coats. A minimum of 3 coats are recommended.
- Let the polyurethane dry completely for 24 hours.
- Attach the brackets and hang your shelves on the wall.